The best combination of safety, efficiency and durability
Cylinders for passenger cars
Cylinders used
Volume, l: from 20 to 210
Pressure, MPa: 20
Application:
Pressure, MPa: 20
Application:
CYLINDERS FOR VEHICLES
TU 4591-010-13055988-2006
for passenger cars
for buses
for freight transport
Aluminum liner produced by Real-Storm is not subject to hydrogen embrittlement
Advantages
Can be used in extreme temperatures from -60 to +65 C.
They are able to withstand pressure 3-3.5 times higher than the working pressure
The possibility of fragmentation of the cylinder is completely excluded.
Up to 40% lighter than Type 1 and 2 cylinders of the same volume.
The interior of the aluminum liner is not subject to corrosion and destruction from rust, unlike Type 1 and 2 cylinders.
Basalt roving provides high strength characteristics, resistance to aggressive environments, vibration resistance, and a wide range of operating temperatures.
Carbon roving provides additional lightness and strength.
The aluminum cylinder liner does not require constant residual pressure, which ensures its complete emptying, unlike Type 4 cylinders.
The heat transfer rate of the materials is higher than that of Type 4 cylinders, which provides faster filling and cost-effective operation.
Aluminum leiner is made of Russian-made pipe and complies with GOST 18482-2018
Contacts
© 1996–2024 LLC “RPF “REAL-STORM”
Contacts for communication
firm
address
address
426039 21 Novosmirnovskaya Street, town of Izhevsk, Udmurt Republic, RUSSIA
E-mail
Sales Department
Feedback
© 1996–2024 LLC “RPF “REAL-STORM”
E-mail
Sales Department
Temperature specification:
TU 4591-010-13055988-2006
for passenger cars
for buses
for freight transport
Metal composite cylinders with a capacity of 47 to 210 l are designed for an operating pressure of 20 MPa, installed on automobile vehicles and intended for transportation, storage and use of compressed natural gas (methane) as motor fuel in accordance with GOST 27577. Used in cars, buses, freight transport, cars, agricultural machinery.
Arctic: -60 to +65 °C
Application:
Operating pressure:
20 MPa
Liner type:
Aluminum seamless
Roving type:
Carbon fiber
Basalt
See drawing of a cylinder with a 20 MPa neck
Scheme for installing cylinders on a car
Cylinder designation
Volume, l
Diameter, mm
Length, mm
Weight, kg
BA 47.20.327/860
47
327
860
36.0
BA 50.20.327/900
50
327
900
37.5
BA 67.20.327/1140
67
327
1140
47.5
BA 80.20.327/1360
80
327
1360
56.5
BA 100.20.327/1660
100
327
1660
69.0
Cylinder designation
Volume, l
Diameter, mm
Length, mm
Weight, kg
BA 67.20.401/840
67
401
840
49.5
BA 80.20.401/965
80
401
965
57.0
BA 85.20.401/1015
85
401
1015
60.0
BA 96.20.401/1125
96
401
1125
67.0
BA 100.20.401/1165
100
401
1165
69.0
BA 132.20.401/1485
132
401
1485
88.5
BA 160.20.401/1765
160
401
1765
105.5
BA 185.20.401/2005
185
401
2005
120.0
BA 210.20.401/2255
210
401
2255
135.0
Сylinders for vehicles
Certificate for metal composite cylinders (type 3) from 20 to 210 liters for compressed natural gas for a working pressure of 20 MPa
Table of characteristics of metal composite cylinders
characteristics
BA 123.20.327/2000
123
327
2000
83.5
Series:
BA