Aluminum liner produced by Real-Storm is not subject to hydrogen embrittlement
Advantages
Can be used in extreme temperatures from -60 to +65 C.
They are able to withstand pressure 3-3.5 times higher than the working pressure
The possibility of fragmentation of the cylinder is completely excluded.
Up to 40% lighter than Type 1 and 2 cylinders of the same volume.
The interior of the aluminum liner is not subject to corrosion and destruction from rust, unlike Type 1 and 2 cylinders.
Basalt roving provides high strength characteristics, resistance to aggressive environments, vibration resistance, and a wide range of operating temperatures.
Carbon roving provides additional lightness and strength.
The aluminum cylinder liner does not require constant residual pressure, which ensures its complete emptying, unlike Type 4 cylinders.
The heat transfer rate of the materials is higher than that of Type 4 cylinders, which provides faster filling and cost-effective operation.
Aluminum leiner is made of Russian-made pipe and complies with GOST 18482-2018
Contacts
© 1996–2025 LLC “RPF “REAL-STORM”
Contacts for communication
firm
address
address
426039 21 Novosmirnovskaya Street, town of Izhevsk, Udmurt Republic, RUSSIA
E-mail
Sales Department
Feedback
Temperature specification:
TU 4591-010-13055988-2006
Metal composite cylinders with a capacity of 47 to 210 l are designed for an operating pressure of 20 MPa, installed on automobile vehicles and intended for transportation, storage and use of compressed natural gas (methane) as motor fuel in accordance with GOST 27577. Used in cars, buses, freight transport, cars, agricultural machinery.
Application:
Operating pressure:
Liner type:
Roving type:
See drawing of a cylinder with a 20 MPa neck
Scheme for installing cylinders on a car
Cylinder designation
Volume, l
Diameter, mm
Length, mm
Weight, kg
BA 47.20.327/860
47
327
860
36.0
BA 50.20.327/900
50
327
900
37.5
BA 67.20.327/1140
67
327
1140
47.5
BA 80.20.327/1360
80
327
1360
56.5
BA 100.20.327/1660
100
327
1660
69.0
Cylinder designation
Volume, l
Diameter, mm
Length, mm
Weight, kg
BA 67.20.401/840
67
401
840
49.5
BA 80.20.401/965
80
401
965
57.0
BA 85.20.401/1015
85
401
1015
60.0
BA 96.20.401/1125
96
401
1125
67.0
BA 100.20.401/1165
100
401
1165
69.0
BA 132.20.401/1485
132
401
1485
88.5
BA 160.20.401/1765
160
401
1765
105.5
BA 185.20.401/2005
185
401
2005
120.0
BA 210.20.401/2255
210
401
2255
135.0
Сylinders for vehicles
Certificate for metal composite cylinders (type 3) from 20 to 210 liters for compressed natural gas for a working pressure of 20 MPa
Table of characteristics of metal composite cylinders
characteristics
BA 123.20.327/2000
123
327
2000
83.5
Series:
Temperature specification:
TU 2296-012-13055988-2009
Metal composite cylinders with a capacity from 50 to 185 liters are designed for operating pressures up to 40 MPa. Used for compressed air, gases and liquids
Application:
Operating pressure:
Liner type:
Roving type:
See drawing of a cylinder with a neck
Cylinder designation
Volume, l
Diameter, mm
Length, mm
Weight, kg
BMK 50.31,4.334/900
50
334
900
43.0
BMK 67.31,4.334/1140
67
334
1140
54.0
BMK 80.31,4.334/1360
80
334
1360
63.0
BMK 100.31,4.334/1660
100
334
1660
81.5
BMK 123.31,4.334/2000
123
334
2000
97.0
BMK 80.31,4.410/965
80
410
965
66.0
BMK 100.31,4.410/1165
100
410
1165
82.0
BMK 132.31,4.410/1485
132
410
1485
108.0
BMK 160.31,4.410/1765
160
410
1765
160.0
Cylinder designation
Volume, l
Diameter, mm
Length, mm
Weight, kg
BMK 80.39,2.418/980
80
418
980
74.0
BMK 100.39,2.418/1180
100
418
1180
100.0
BMK 132.39,2.418/1500
132
418
1500
119.0
BMK 160.39,2.418/1780
160
418
1780
144.0
BMK 185.39,2.418/2020
185
418
2020
167.0
CYLINDERS FOR COMPRESSED AIR, GASES AND LIQUIDS
Certificate for metal composite cylinders from 0.050 to 0.185 m3, maximum permissible operating pressure, MPa: 31.4; 39.2.
Table of characteristics of metal composite cylinders
CHARACTERISTICS
BMK 185.31,4.410/2005
185
410
2005
151.0
Cylinders with a working pressure of 31.4 MPa
Cylinders with a working pressure of 39.2 MPa
Series:
Temperature specification:
TU 2296-009-13055988-2005
Combined metal-composite cylinders with a capacity from 47 to 185 liters, designed for operating pressures of 20 and 24.5 MPa, intended for transportation, storage and use of technical gases. The following working media can be used in cylinders: air, nitrogen, argon, carbon dioxide, oxygen, helium.
Application:
Operating pressure:
Liner type:
Roving type:
See drawing of a cylinder with a neck
Cylinder designation
Volume, l
Diameter, mm
Length, mm
Weight, kg
BG 47.20.326/860
47
326
860
36.0
BG 50.20.326/900
50
326
900
37.5
BG 67.20.326/1140
67
326
1140
47.5
BG 80.20.326/1360
80
326
1360
56.5
BG 100.20.326/1660
100
326
1660
69.0
BG 123.20.326/2000
123
326
2000
83.5
BG 67.20.398/840
67
398
840
49.5
BG 80.20.398/965
80
398
965
57.0
BG 85.20.398/1015
85
398
1015
60.0
Cylinder designation
Volume, l
Diameter, mm
Length, mm
Weight, kg
BG 50.24,5.330/900
50
330
900
39.0
BG 80.24,5.330/1360
80
330
1360
59.0
BG 83.24,5.330/1400
83
330
1400
60.4
BG 100.24,5.330/1660
100
330
1660
72.0
BG 123.24,5.330/2000
123
330
2000
86.5
CYLINDERS FOR TECHNICAL GASES
Certificate for metal composite cylinders from 47 to 185 liters for compressed air, gases and liquids for a working pressure of 20 MPa (24.5 MPa)
Table of characteristics of metal composite cylinders
CHARACTERISTICS
BG 96.20.398/1125
96
398
1125
67.0
Cylinders with a working pressure of 20.0 MPa
Cylinders with a working pressure of 24.5 MPa
Cylinders of this type cannot be used for transportation, storage and use of natural gas (methane)
BG 100.20.398/1165
100
398
1165
69.0
BG 132.20.398/1485
132
398
1485
88.5
BG 160.20.398/1765
160
398
1765
105.5
BG185.20.398/2005
185
398
2005
120.0
BG 80.24,5.406/965
80
406
965
57.2
BG 100.24,5.406/1165
100
406
1165
72.0
BG 132.24,5.406/1485
132
406
1485
92.4
BG 160.24,5.406/1765
160
406
1765
110.3
BG 185.24,5.406/2005
185
406
2005
126.0
Series:
Temperature specification:
TU 4591-010-13055988-2006
Metal-composite cylinders with a capacity of 80 to 210 liters are designed for an operating pressure of 24.5 MPa, installed on gas accumulator blocks (GAB), small-sized mobile gas tankers (SMGT), mobile automobile gas tankers (MAGT), automobile gas filling compressor stations (AGFCS) and intended for transportation, distribution, storage of compressed natural gas (methane)
Application:
Operating pressure:
Liner type:
Roving type:
See drawing of a cylinder for a pressure of 24.5 MPa
Cylinder designation
Volume, l
Diameter, mm
Length, mm
Weight, kg
BA 80.24,5.330/1360
80
330
1360
59.0
BA 83.24,5.330/1400
83
330
1400
60.4
BA 100.24,5.330/1660
100
330
1660
77.0
BA 123.24,5.330/2000
123
330
2000
92.0
BA 80.24,5.406/965
80
406
965
57.2
Cylinder designation
Volume, l
Diameter, mm
Length, mm
Weight, kg
BA 100.24,5.406/1165
100
406
1165
72.0
BA 132.24,5.406/1485
132
406
1485
92.4
BA 160.24,5.406/1765
160
406
1765
110.3
BA 185.24,5.406/2005
185
406
2005
126.0
BA 210.24,5.406/2255
210
406
2255
147.0
CYLINDERS FOR STATIONARY AND MOBILE MODULES
Certificate for metal composite cylinders from 20 to 210 liters for compressed natural gas for a working pressure of 20 MPa (24.5 MPa)
Table of characteristics of metal composite cylinders
CHARACTERISTICS
Series:
Temperature specification:
TU 1410-001-13055988-2005
The cylinders are designed for storing water, aqueous solutions, carbon dioxide, SF6 gas, nitrogen and their mixtures, as well as refrigerants and their environmentally friendly substitutes. It is allowed to store other gases and liquids that are compatible in terms of corrosion resistance with the material of the cylinder body
Application:
Operating pressure:
Liner type:
See drawing of a cylinder with a neck
Cylinder designation
Volume, l
Diameter, mm
Length, mm
Weight, kg
BI-60-40
60
370
943
25
BI-70-40
70
370
1043
27
BI-80-40
80
370
1143
29
BI-100-40
100
370
1343
34
BI-130-40
130
370
1643
38
Cylinder designation
Volume, l
Diameter, mm
Length, mm
Weight, kg
BI-60-60
60
380
826
24.4
BI-70-60
70
380
926
27.1
BI-80-60
80
380
1026
30
BI-100-60
100
380
1226
37.3
BI-130-60
130
380
1526
46.4
Certificate for cylinders for water, aqueous solutions and extinguishing gases from 3.9 to 31.4 MPa
FIRE EXTINGUISHING CYLINDERS
Table of characteristics of metal composite cylinders
Roving type:
CHARACTERISTICS
Cylinders with a working pressure of 4.0 MPa
Cylinders with a working pressure of 6.0 MPa
BI-160-40
160
370
1943
44
BI-160-60
160
380
1826
62.2
Cylinder designation
Volume, l
Diameter, mm
Length, mm
Weight, kg
BI-20-150
20
268
576
11.5
BI-30-150
30
268
795
16.1
BI-60-150
60
390
826
34
BI-70-150
70
390
926
38.4
Cylinder designation
Volume, l
Diameter, mm
Length, mm
Weight, kg
BI-80-150
80
390
1026
42.5
BI-100-150
100
390
1226
51.5
BI-130-150
130
390
1526
63.8
BI-160-150
160
390
1826
76.5
Cylinders with a working pressure of 15.0 MPa
Series:
© 1996-2025 NPF Real-Storm Ltd.
Official mail
Sales department